New software - Version 2.41

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman T51Pro MCS51 / AVR ISP programmer.

Version 2.41 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: DatamanT51ProDeviceList.pdf

Bug Fixes
Atmel AVR AT90S2323, bug fixed
Atmel AT91SAM7Sxx in QFN64, insertion test procedure bug fixed
EM Micro EM4176/EM6869/EM6580/EM6812, programming improved
Fujitsu MBM27C1028 programming bug fixed
Hitachi/Renesas HD64F3064F [QFP100], bugs fixed
Lattice ispGAL22V10Ax, pin assignment bug fixed
Lattice ispLSI1016E, loading of some JEDEC files bug fixed
Motorola/Freescale HC08 fatal error bug fixed
Philips/NXP, all UOCIII in QFP128, insertion test procedure bug fixed
Philips/NXP, all LPC21xx in QFP64, insertion test procedure bug fixed
Philips/NXP, all UOC-TOP and UOC-Fighter in SDIP64, insertion test procedure bug fixed
Samsung K9F2G08U0A, algorithm bugs removed
SGS-Thomson (STM) ST7FLITE19, programming option bits bug fixed
Spansion S71PL128N, programming procedure bug fixed
Texas Instrument (TMS) TMS320F2812, programming and verification bug fixed
Texas Instrument (TMS) TMS320F2812[BGA179], power-up sequence improved
Xilinx XC2C64A [VQFP100], insertion test bug fixed
27HC641, MCM68766 and WS57C49x programming bug fixed
8-bit NAND FLASH, correction in invalid block detection during programming
8 and 16-bit NAND FLASH, chips with auto page preload read/verify improved
16-bit NAND FLASH, verify procedure if ECC used bug fixed

Other Changes
Altera EPC2, code optimization
Atmel AVR chips, show configuration into log by more user friendly mode
Atmel AT45DB161D [TSOP28], device programming improved
Atmel AT88SC0204C, configuration zone programming improved
Atmel AT88SC0204C, improved verify operation
EM Micro. EM6812, EM6580, code modification according EM request
Eon Silicon Dev. EN29LV160AT, Erase and Programming procedure modification (Temporary UnProtect removed)
Freescale/Motorola MC68HC908EY16, ICGTRIM calculation added
Holtek HT48xxx, power-up modification
Macronix MX29LV320TT, MX29LV320BT, MX29LV320CT, MX29LV320CB, programming procedure improved
Macronix MX29LV640D, checksum also included SecSi area
Motorola/Freescale MC68HC908LB8, QYx, QTx, QCx, QBx: OSCTRIM calculation added
Motorola/Freescale MM9086xx, MC68HC908GTx, EY16, KXx: ICGTRIM calculation added
Microchip PIC16F883, PICmicro checksum calculation added
Motorola MC68HC705P6A, programming algorithm enhancement
Motorola/Freescale MC68HC908AP8, MC68HC908AP16, added General info
Philips/NXP, all UOCIII, load DMP files procedure improved
Philips/NXP all LPC23xx, programming CRP speed increased
Renesas Technology M16C(ISP)power-down modification
Renesas Technology M34283G2GP, M37544G2A, programming speed increased
SiLabs C8051F411, ID check procedure improved
Spansion S25FL128P, edit device name and backward project compatibility correction
SST SST39WF800A, programming speed increased
Winbond W19B32xMT, W19B32xMB, programming procedure improved
Winbond W79E632A, programming security register improved (Scramble bit added)
Xilinx XC18Vxxx, XCFxxxS, code optimization
Xilinx XC95108 [PLCC84], increasing of overcurrent protection limits

Best regards,

Daniel Smith