I Need to program the AT89C51RD2 MCU. But it appears the the Dataman 48Pro+ pops out "Insertion error, bad contact on Pin 2,43,44 of Programming chip. And i do not understand why.
I am using a DIP44/PLCC44 Converter. Which I believe is a universal converter.
How can I get this working. Thanks.
Paul_Momas
DIP44/PLCC44
-
Dataman (Neil Parker)
- Posts: 935
- Joined: 10 Nov 2011 09:51
Re: DIP44/PLCC44
Hello Paul_Momas,
Thank you for posting on our forum.
The AT89C51RD2 MCU requires the socket adaptor DIL44/PLCC44 ZIF which is classed as universal and is wired 1:1 by pin number (e.g. DIL1-PLCC1, DIL2-PLCC2, etc.). Please check the pin out of your adaptor to see if it matches this.
If you have any questions, please let me know.
Regards,
Neil Parker
Dataman Programmers
Thank you for posting on our forum.
The AT89C51RD2 MCU requires the socket adaptor DIL44/PLCC44 ZIF which is classed as universal and is wired 1:1 by pin number (e.g. DIL1-PLCC1, DIL2-PLCC2, etc.). Please check the pin out of your adaptor to see if it matches this.
If you have any questions, please let me know.
Regards,
Neil Parker
Dataman Programmers
Who is online
Users browsing this forum: No registered users and 0 guests
