Page 1 of 1
S4 with ST62T65C6
Posted: 14 Nov 2011 12:47
by Guest
Is there a way to copy a ST62T65C6 eprom with a Dataman S4
Re: S4 with ST62T65C6
Posted: 14 Nov 2011 12:47
by Dataman (Neil Parker)
Hi,
No, this is a microcontroller which is unsupported by the Dataman S4.
We do not possess any programming specs of ST microcontrollers.
There has not been sufficient interest to warrant adding support for these micros.
Neil
Re: S4 with ST62T65C6
Posted: 14 Nov 2011 12:48
by Guest
Which settings should I use to copy NEC 27C2001D-15 Uv eproms and burning to ST M27C2001-12 ?
Gareth Hubbard
Re: S4 with ST62T65C6
Posted: 14 Nov 2011 12:48
by Dataman (Neil Parker)
1. Download S4 Eprom library v2.93
2. Select NEC 27C2001 or 27C2001 either manually or by FUNC PROM.
3. Insert the chip
4. LOAD 00000,3FFFF,00000
5. Select ST 27C2001 (manually or auto identification)
6. BURN 00000,3FFFF,00000
Neil