New software - Version 2.33

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 40Pro universal programmer.

Version 2.33 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: http://www.dataman.com/Pdf/Dataman40ProDeviceList.pdf

Bug Fixes
ATMEL ATtiny24/44/84 EEPROM programming bug fixed
Atmel AT89Sx051 on PREPROM-02 programming bug fixed
Cypress CY7C264 programming bug (arise at special conditions only) fixed
Dallas/Maxim DS2502 project saving bug fixed (Alt+S setting)
Freescale MC68HC908GP32 (ISP) flash programming bug fixed
Freescale MC9S08AW60 (ISP) verification bug fixed
Microchip PIC16F636, EEPROM size bug fixed
Microchip PIC16F873A, load ID from hex file improved
Motorola/Freescale MC68HC908JL16 erase bug fixed
Motorola/Freescale HCS12 inZIF routines bug fixed
Philips P89V51RB2 and P89LV51RB2 ID check error bug fixed
Samsung KAD060300B, KAD070300B, KAD060700D, KAD070700D bug fixed
Spansion S29GL032Axxxx bug fixed
Spansion S29GL256N [TSOP56] x16 insertion test bug fixed
Spansion S29GL128N programming improved
SST SST34HF1641J erase procedure improved

Other Changes
ATMEL AVR (ISP) ISP clock improved can be set down to 100Hz
BOSCH B57604 support excluded
Cypress CY8C29666 power-up improved
Cypress CY7C261 programming improvements
Macronix MX26C512A, Erase before programming options added
Microchip PIC10Fxx, PIC12Cxx, PIC16Cxx, PIC17Cxx (ISP) code modification in intent to detect missed chip
Motorola MC68HC705P6A "verify after programming" handling improved
Myson MTV412 improvement
NEC uPD78F9116, erase procedure indication improved
Sharp LH28F640BFN ERASE and UNPROTECT procedure improved
TI MSP430 series in JTAG mode improved
NAND Flash memories programming speed increased
issued support of NAND Flash, that more than 1 GByte capacity

Best regards,

Daniel Smith