New software - Version 3.48

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.

Version 3.48 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf

Major Changes
Fixed "Disk full" error for "Save project" operation, to correctly report the error and stop saving of project file
Fixed default selection of buffers included to checksum calculator for default device after starting of PG4UW
Fixed incorrect checking of project checksum when loading projects for Cypress CY8C3445AXI. The incorrect checking of checksum causes "Error: Main buffer data check sum mismatch!" also for projects, that are ok (not corrupted)

Other Changes
Added adapter: DIL48/QFP100-1.01 ZIF PIC-6
Added adapter: DIL48/TFBGA232 ZIF-CS.1 MT-AP00300
Added adapter: DIL8/QFN8-5/2 ZIF SFlash-1b
Analog devices ADuC7020/7021, Power-Up sequence modified
Fujitsu/Spansion/Cypress MB96F31x [LQFP48], added independent programming option of the flash security
GigaDevice Semic. GD25WD20C [SOP8-150], verify procedure improved
Hitachi HD64F3334YTF16 [PLCC84], change name to HD64F3334YCP16 [PLCC84]
Luminary Micro/TI (TMS) LM3S57/59/5B/5K/5P/5Rxx [LQFP100]/[BGA108], power-up sequence modified
Luminary Micro/TI (TMS) LM3S97/99/9B/9L [LQFP100]/[BGA108], power-up sequence modified
Luminary Micro/TI (TMS) LM3S9B92, improved stability of operations
Luminary Micro/TI (TMS) LM3Sxxx devices, verify procedure improved
Macronix MX25U25635F [WSON8 8x6] (Quad I/O), allowed DIL8/QFN8-5/2 ZIF SFlash-1b adapter for better operation stability
Microchip PIC32MX150F128D (ISP-2wire JTAG), programming Boot Flash Memory improved
Microchip (SST) SST25VF032B [SOIC8-200], changed device name and backward project compatibility correction
Micron MT25QU256ABA8E [SO16W] (Quad I/O), power up sequence improved
Micron MT29F1G01ABBFDWB [U-PDFN8], allowed DIL8/QFN8-5/2 ZIF SFlash-1b adapter for better operation stability
MTK MT-AP00300, Device info. text correction
Nordic nRF24LU1P-F32 [QFN32], programming procedure improved
Renesas R5F521A8xxFP [LFQFP100] Boot mode, device option modified
Renesas R7F701414, programming procedure modified
Serial NAND, 1Gbit, 1.8V supply, operation stabilized
SST SST25VF032B [SOIC8-200], changed device name and backward project compatibility correction
STMicroelectronics ST62T25, device special menu disabled
Toshiba TC58CYG0S3HRAIG [WSON8], allowed DIL8/QFN8-5/2 ZIF SFlash-1b adapter for better operation stability
Toshiba TC58CYG2S0HRAIG [WSON8], allowed DIL8/QFN8-5/2 ZIF SFlash-1b adapter for better operation stability
Winbond W25Q32JVxxxQ/M, SRL bit programming improved
Winbond W25N01GWZE [WSON8], allowed DIL8/QFN8-5/2 ZIF SFlash-1b adapter for better operation stability

Bug Fixes
ABOV Semiconductor MC96FT242D [SOP32], insertion test bug fixed
Atmel/Microchip ATtiny4/5/9/10/20/40/102/104, Blank check bug fixed
DIL8/QFN8-5 ZIF-CS SFlash-1, Automatic YES! problem fixed
Fixed program crash on selecting some of NAND flash devices
Fujitsu MBM27C2000, device size fixed
GigaDevice Semic. GD32, problem with Automatic YES! on devices with less than 48 pins fixed
Macronix MX25U25635F [WSON8 8x6] (Quad I/O), Insertion test with DIL8/QFN8-5/2 ZIF SFlash-1b adapter bug fixed
Megawin MPC89E58A, device size bug fixed
Microchip PIC16F884/887 [TQFP44], Insertion test bug fixed
Microchip PIC32MX110/120/130/150/170FxxxB/C/D, set of DEBUG bit bug fixed
NXP LPC54113J256 [LQFP64], Power-Up sequence bug fixed
STMicroelectronics STM32, problem with Automatic YES! on devices with less than 48 pins fixed
STMicroelectronics STM32L0xx and STM32L1xx, fixed problem with EEPROM programming (communication error)
STMicroelectronics STM32L1xx, fixed problem with Option Bytes editability in <Alt+S> after device selection
STMicroelectronics STM32L4xx, main memory blank check problem fixed
Toshiba TC58CxGxxx serial NAND, spare area size setting fixed

Best regards,

Daniel Smith