New software - Version 3.62
Posted: 20 Oct 2020 15:32
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.
Version 3.62 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf
Major Changes
Recently loaded file name and file information is now preserved after selecting of new device by any of menu commands "Device | Select ..."
Other Changes
Added adapter: DIL48/module ZIF-CS Murata WiFi-1
Added adapter: DIL48/QFN32-1.02 ZIF M4xx-1
Added adapter: DIL48/QFN40-2.02 ZIF IT-1
Added adapter: DIL48/QFN48-1.02 ZIF TLSR-2
Added adapter: DIL48/QFP48-1.02 ZIF M4xx-1
Added adapter: DIL48/QFP64-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP128-1.01 ZIF ITE-2
Added adapter: DIL48/QFP128-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP144-1.02 ZIF-CS R5F-5
Added adapter: DIL48/QFP144-1.02 ZIF M4xx-1
Added adapter: DIL48/TSSOP20-170 ZIF MS51-1
Altera EPCE16 [PQFP100], stability of reading/verifying device improved
FORESEE FS35ND01G-S1Y2QWFI000 [WSON8], FS35ND02G-S3Y2QWFI000 [WSON8], FS35ND04G-S2Y2QWFI000 [WSON8], added OTP area support, removed Block Protection support (under the direction of the devices manufacturer)
Intel/Altera MAX V, improving of checksum calculation, enabling of checksum options dialogue
Intel/Altera MAX 10, improving of checksum displaying
ITE Tech. Inc. IT8851FN, enter to debug mode modified
Macronix MX35LF4GE4AD [WSON8], SPI NOR compatibility features support added
Macronix MX77L12850F [SOP8-200] (Quad I/O) (woRPMC), changed device name and backward project compatibility
Macronix MX77L12850F [WSON8 6x5] (Quad I/O) (woRPMC), changed device name and backward project compatibility
NEC/Renesas uPD70F3376A, initialization procedure improved
NEC/Renesas uPD78F0513A (ISP-UART), Baud Rate set for communication improved
NXP MK80FN256xDC15 programming modified
Renesas R7F701441, programming algorithm modified
TI(TMS) TMS320F28075, improving of programming procedure
Bug Fixes
Atmel/Microchip ATSAML21G18B [QFN48], ID check error bug fixed
eMMC devices, Authentication failure bug fixed
GigaDevice GD25LD40C [USON8 3x2], Automatic YES bug fixed
Infineon XMC1202-xxxxx0032AB [TSSOP16], XMC1302-xxxxx0032AB [TSSOP16] - ID check error bug fixed
Macronix MX25UW51245GXD: Configuration Register2 verification bug fixed
Macronix MX25UW51245GXD: Programming error after Erase fixed
Renesas R5Fxxx (ISP) devices, Bad target system supply voltage value bug fixed
STMicroelectronics STM8AF62xx, block size bug fixed
STMicroelectronics STM8AF6226T, programming/verifying option bytes bug fixed
uPD78F05xx ISP devices; Oscillator frequency value not saved in the project bug fixed
Winbond/Nuvoton W78E365A [PQFP44], Insertion test bug fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.
Version 3.62 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf
Major Changes
Recently loaded file name and file information is now preserved after selecting of new device by any of menu commands "Device | Select ..."
Other Changes
Added adapter: DIL48/module ZIF-CS Murata WiFi-1
Added adapter: DIL48/QFN32-1.02 ZIF M4xx-1
Added adapter: DIL48/QFN40-2.02 ZIF IT-1
Added adapter: DIL48/QFN48-1.02 ZIF TLSR-2
Added adapter: DIL48/QFP48-1.02 ZIF M4xx-1
Added adapter: DIL48/QFP64-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP128-1.01 ZIF ITE-2
Added adapter: DIL48/QFP128-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP144-1.02 ZIF-CS R5F-5
Added adapter: DIL48/QFP144-1.02 ZIF M4xx-1
Added adapter: DIL48/TSSOP20-170 ZIF MS51-1
Altera EPCE16 [PQFP100], stability of reading/verifying device improved
FORESEE FS35ND01G-S1Y2QWFI000 [WSON8], FS35ND02G-S3Y2QWFI000 [WSON8], FS35ND04G-S2Y2QWFI000 [WSON8], added OTP area support, removed Block Protection support (under the direction of the devices manufacturer)
Intel/Altera MAX V, improving of checksum calculation, enabling of checksum options dialogue
Intel/Altera MAX 10, improving of checksum displaying
ITE Tech. Inc. IT8851FN, enter to debug mode modified
Macronix MX35LF4GE4AD [WSON8], SPI NOR compatibility features support added
Macronix MX77L12850F [SOP8-200] (Quad I/O) (woRPMC), changed device name and backward project compatibility
Macronix MX77L12850F [WSON8 6x5] (Quad I/O) (woRPMC), changed device name and backward project compatibility
NEC/Renesas uPD70F3376A, initialization procedure improved
NEC/Renesas uPD78F0513A (ISP-UART), Baud Rate set for communication improved
NXP MK80FN256xDC15 programming modified
Renesas R7F701441, programming algorithm modified
TI(TMS) TMS320F28075, improving of programming procedure
Bug Fixes
Atmel/Microchip ATSAML21G18B [QFN48], ID check error bug fixed
eMMC devices, Authentication failure bug fixed
GigaDevice GD25LD40C [USON8 3x2], Automatic YES bug fixed
Infineon XMC1202-xxxxx0032AB [TSSOP16], XMC1302-xxxxx0032AB [TSSOP16] - ID check error bug fixed
Macronix MX25UW51245GXD: Configuration Register2 verification bug fixed
Macronix MX25UW51245GXD: Programming error after Erase fixed
Renesas R5Fxxx (ISP) devices, Bad target system supply voltage value bug fixed
STMicroelectronics STM8AF62xx, block size bug fixed
STMicroelectronics STM8AF6226T, programming/verifying option bytes bug fixed
uPD78F05xx ISP devices; Oscillator frequency value not saved in the project bug fixed
Winbond/Nuvoton W78E365A [PQFP44], Insertion test bug fixed
Best regards,
Daniel Smith