New software - Version 3.70
Posted: 14 Sep 2021 10:58
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.
Version 3.70 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf
Major Changes
Other Changes
Added adapter: Bottom R-TSOP32 NOR-1
Added adapter: DIL48/BGA265-1 ZIF STM32H-1
Added adapter: DIL48/BGA64-2.3 ZIF NOR-5
Added adapter: DIL48/QFP112-1.03 ZIF R5F-2
Added adapter: DIL48/QFN40-1.02 ZIF TCA8-1
Added adapter: DIL48/QFN40-2.02 ZIF IDT49V-1
Added adapter: DIL48/QFN40-2.02 ZIF TPS53-5
Added adapter: DIL48/QFN48-2.02 ZIF CY-6
Added adapter: DIL48/QFN48-2.02 ZIF TPS53-3
Added adapter: DIL48/QFP80-1.02 ZIF CY-1
Added adapter: DIL48/SSOP10-120 ZIF MS51-1
Added adapter: DIL48/SSOP56 ZIF-CS NOR-1
Added adapter: DIL48/WLCSP36-7 ZIF-CS PLD-1
Added adapter: DIL8/QFN8-4.02 ZIF
Adapter DIL48/QFN68-1.02 ZIF STM32WB-1 modified
Adapters DIL8/BGA24-1 ZIF SFlash-1b, DIL8/BGA24-2 ZIF SFlash-1b and DIL16W/SOIC16 ZIF 300mil SFlash-1b enabled as an alternative for serial NAND
Anlogic EF2L15xxxxxB [LQFP100](SVF), power-up sequence modified
Anlogic EF2L15xxxxxB [LQFP144](SVF), power-up sequence modified
Atmel/Microchip ATmega48PB/88PB/168PB/328PB in QFN28/MLF28/QFN32/MLF32/QFP32 package, added new programming adapter option
AutomaticYES! for DIL48/BGA265-1 ZIF STM32H-1 modified
Freescale Semic./NXP MK10DX256, reading of FlexNVM partition settings modified
Infineon PX8xxxxxx, programming algorithm improved
Lattice LC4128V [TQFP100], improving of overcurrent protection system and power-up procedure
Macronix MX25L25645G [WSON8 8x6], displaying of information about Verifying Status Register - error! improved
Macronix MX35LF2GE4AD [WSON8], MX35LF4GE4AD [WSON8], fixed SPI NOR compatibility mode, added Continuous read mode and Bad Block Management Function support
Macronix Serial Flash woRPMC devices, changed device name and backward project compatibility
MBN combined input file load procedure improved
Modified adapter: DIL48/WLCSP25-3 ZIF STM32G-1
Microchip PIC18F43K22, communication speed decreased
NEC/Renesas uPD70F3524, uPD70F3526, OPBTx value information into log window added
Nuvoton ML51xxx, Alt+S view/edit dialogue improved
Parade PS176 [QFN48](PS-1), programming algorithm improved
Realtek RTL8752Cxx, RTL8762Cxx, Added Vendor Key programming
Renesas/Mitsubishi M38039FF (ISP-UART), external clock using improved and recommended ISP connection modified
Renesas R5F5631xxxFx, Boot mode programming speed improved
Renesas R7F701418, OPBTx value information into log window added
Silicon Laborat. EFR32xG12xxx, EFR32xG13xx, EFR32xG14xx devices, power-up sequence modified
Silicon Laborat. EFR32xG12xxx devices, added new option for programming the Bootloader area
SkyHigh (ex Cypress ex Spansion) S34ML04G300xxxxx, Axia Memory Tech. AX20NV4G821TA [TSOP48], Permanent Block Protection procedures optimized
STMicroelectronics STM32H753ZIT, default option bytes value modified
TI (TMS) CC2540-F256 [QFN40](SDAE), power-off procedure improved
TI TM4C129xxx, XM4C129xxx devices, programming procedure improved
XTX XT26G01CWS [WSON8], internal ECC controller support changed
Bug Fixes
Adapter DIL8/BGA8-2 ZIF-CS, insertion test bug fixed
Iflytek HD2886D [QFN48], access violation bug fixed
ITE Tech. Inc. IT8987E, program freeze in case of bad contacts and device insertion test disable fixed
LGE_HEAD customized eMMC devices, fixed problem for older projects
Macronix MX31LF1GE4BC [BGA24], Unexpected error 1 [IEC:1, D:0F] fixed
Microchip dsPIC33FJ128MC80x, added IOL1WAY configuration bit and bug fixed in Alt+S menu
MPS MP2975, MP2978, I2C device address bug fixed, if programming process change it
NEC/Renesas uPD78F114x, programming security bug fixed
Renesas R5F5631xxxFx, Boot mode erase bug fixed
Renesas/Hitachi R4F24569xVxFQ, erase before programming bug fixed
Samsung KLMAG1JETD-B041 [FBGA153], Device size error fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.
Version 3.70 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf
Major Changes
Other Changes
Added adapter: Bottom R-TSOP32 NOR-1
Added adapter: DIL48/BGA265-1 ZIF STM32H-1
Added adapter: DIL48/BGA64-2.3 ZIF NOR-5
Added adapter: DIL48/QFP112-1.03 ZIF R5F-2
Added adapter: DIL48/QFN40-1.02 ZIF TCA8-1
Added adapter: DIL48/QFN40-2.02 ZIF IDT49V-1
Added adapter: DIL48/QFN40-2.02 ZIF TPS53-5
Added adapter: DIL48/QFN48-2.02 ZIF CY-6
Added adapter: DIL48/QFN48-2.02 ZIF TPS53-3
Added adapter: DIL48/QFP80-1.02 ZIF CY-1
Added adapter: DIL48/SSOP10-120 ZIF MS51-1
Added adapter: DIL48/SSOP56 ZIF-CS NOR-1
Added adapter: DIL48/WLCSP36-7 ZIF-CS PLD-1
Added adapter: DIL8/QFN8-4.02 ZIF
Adapter DIL48/QFN68-1.02 ZIF STM32WB-1 modified
Adapters DIL8/BGA24-1 ZIF SFlash-1b, DIL8/BGA24-2 ZIF SFlash-1b and DIL16W/SOIC16 ZIF 300mil SFlash-1b enabled as an alternative for serial NAND
Anlogic EF2L15xxxxxB [LQFP100](SVF), power-up sequence modified
Anlogic EF2L15xxxxxB [LQFP144](SVF), power-up sequence modified
Atmel/Microchip ATmega48PB/88PB/168PB/328PB in QFN28/MLF28/QFN32/MLF32/QFP32 package, added new programming adapter option
AutomaticYES! for DIL48/BGA265-1 ZIF STM32H-1 modified
Freescale Semic./NXP MK10DX256, reading of FlexNVM partition settings modified
Infineon PX8xxxxxx, programming algorithm improved
Lattice LC4128V [TQFP100], improving of overcurrent protection system and power-up procedure
Macronix MX25L25645G [WSON8 8x6], displaying of information about Verifying Status Register - error! improved
Macronix MX35LF2GE4AD [WSON8], MX35LF4GE4AD [WSON8], fixed SPI NOR compatibility mode, added Continuous read mode and Bad Block Management Function support
Macronix Serial Flash woRPMC devices, changed device name and backward project compatibility
MBN combined input file load procedure improved
Modified adapter: DIL48/WLCSP25-3 ZIF STM32G-1
Microchip PIC18F43K22, communication speed decreased
NEC/Renesas uPD70F3524, uPD70F3526, OPBTx value information into log window added
Nuvoton ML51xxx, Alt+S view/edit dialogue improved
Parade PS176 [QFN48](PS-1), programming algorithm improved
Realtek RTL8752Cxx, RTL8762Cxx, Added Vendor Key programming
Renesas/Mitsubishi M38039FF (ISP-UART), external clock using improved and recommended ISP connection modified
Renesas R5F5631xxxFx, Boot mode programming speed improved
Renesas R7F701418, OPBTx value information into log window added
Silicon Laborat. EFR32xG12xxx, EFR32xG13xx, EFR32xG14xx devices, power-up sequence modified
Silicon Laborat. EFR32xG12xxx devices, added new option for programming the Bootloader area
SkyHigh (ex Cypress ex Spansion) S34ML04G300xxxxx, Axia Memory Tech. AX20NV4G821TA [TSOP48], Permanent Block Protection procedures optimized
STMicroelectronics STM32H753ZIT, default option bytes value modified
TI (TMS) CC2540-F256 [QFN40](SDAE), power-off procedure improved
TI TM4C129xxx, XM4C129xxx devices, programming procedure improved
XTX XT26G01CWS [WSON8], internal ECC controller support changed
Bug Fixes
Adapter DIL8/BGA8-2 ZIF-CS, insertion test bug fixed
Iflytek HD2886D [QFN48], access violation bug fixed
ITE Tech. Inc. IT8987E, program freeze in case of bad contacts and device insertion test disable fixed
LGE_HEAD customized eMMC devices, fixed problem for older projects
Macronix MX31LF1GE4BC [BGA24], Unexpected error 1 [IEC:1, D:0F] fixed
Microchip dsPIC33FJ128MC80x, added IOL1WAY configuration bit and bug fixed in Alt+S menu
MPS MP2975, MP2978, I2C device address bug fixed, if programming process change it
NEC/Renesas uPD78F114x, programming security bug fixed
Renesas R5F5631xxxFx, Boot mode erase bug fixed
Renesas/Hitachi R4F24569xVxFQ, erase before programming bug fixed
Samsung KLMAG1JETD-B041 [FBGA153], Device size error fixed
Best regards,
Daniel Smith