New software - Version 3.72
Posted: 29 Nov 2021 10:44
Dear Dataman users,
New software has just been posted on our software pages for the Dataman MEMPro universal memory programmer.
Version 3.72 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: DatamanMEMProDeviceList.pdf
Major Changes
Buffer/Fill random, Buffer/Erase, action took place even on pressing Esc, fixed
Other Changes
Atmel AT45DB161B [TSOP28], alternative programming adapter DIL28/TSOP28 ZIF 11.8mm SFlash-1 acceptance added
Atmel/Microchip AT89LP52 (ISP), added new feature 'Level of POL signal' to device option
Atmel/Microchip ATSAMC20/ATSAMC21 series, device ID codes revised
Cypress S26KL/S26KS/S26HL/S26HS series, verification procedure modified
eMMC devices, Erase operation improved
Fresco Logic FL7102-2Q0 [QFN40], Verifying device modified
GigaDevice GD25LB512ME [SOP16], verify procedure modified
GigaDevice GD25Q80E [SOP8-150], setting Protected memory modified
Microchip ATmega808/809/1608/1609/3208/3209/4808/4809 in ZIF, Power on sequence modified, stability issues
Microchip AVR UPDI devices, error message when device is locked and erase procedure modified
Microchip/Atmel AT24C128C, reading device improved stability improved
Microchip AVR32 UC3A and UC3B family, Blank check modified
Microchip PIC18F6xK22, power-on procedure improved
MPS MP2975/8, programming procedure improved
NAND flash devices, unified way of working with different types of permanent block protection
NEC uPD78F9842 [QFP44](UART), initialization procedure improved
NEC/Renesas uPD70F3524, verification procedure improved
Nuvoton NUC1xx series, file load procedure improved
Silicon Laborat. EFM8BB2x, EFM8BB3x, EFM8LB1x, EFM8UB1x, EFM8UB3x, verify procedure improved
SPI EEPROM (ISP), changed of information about WP\ pin level detected in L
STMicroelectronics STM32F09x, Option bytes blank check modified (to accept production state as the blank)
Bug Fixes
Atmel/Microchip AT89LP52 (ISP), supply voltage range bug fixed
Freescale Semic., NXP MC9S12Bxxx, fixed bug in Device info - section "Buffer data layout description"
Iflytek HD2886D [QFN48], programming algorithm bug fixed
Macronix MX28F2100B [TSOP48], programming bug fixed
Microchip ATmega808/809/1608/1609/3208/3209/4808/4809 in ZIF, power on sequence bug fixed
Microchip AVR UPDI devices, inability to disable CRC check bug fixed
Microchip dsPIC33EP256GMxxx, programming bug of the User ID locations fixed
NXP MCF5281 [MAPBGA256], AutomaticYES! bug fixed
STMicroelectronics BlueNRG-232, programming procedure bug fixed
STMicroelectronics STM32L5xx, erase procedure bug fixed
STMicroelectronics STM8AF6226TxSSS, programming procedure bug fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman MEMPro universal memory programmer.
Version 3.72 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: DatamanMEMProDeviceList.pdf
Major Changes
Buffer/Fill random, Buffer/Erase, action took place even on pressing Esc, fixed
Other Changes
Atmel AT45DB161B [TSOP28], alternative programming adapter DIL28/TSOP28 ZIF 11.8mm SFlash-1 acceptance added
Atmel/Microchip AT89LP52 (ISP), added new feature 'Level of POL signal' to device option
Atmel/Microchip ATSAMC20/ATSAMC21 series, device ID codes revised
Cypress S26KL/S26KS/S26HL/S26HS series, verification procedure modified
eMMC devices, Erase operation improved
Fresco Logic FL7102-2Q0 [QFN40], Verifying device modified
GigaDevice GD25LB512ME [SOP16], verify procedure modified
GigaDevice GD25Q80E [SOP8-150], setting Protected memory modified
Microchip ATmega808/809/1608/1609/3208/3209/4808/4809 in ZIF, Power on sequence modified, stability issues
Microchip AVR UPDI devices, error message when device is locked and erase procedure modified
Microchip/Atmel AT24C128C, reading device improved stability improved
Microchip AVR32 UC3A and UC3B family, Blank check modified
Microchip PIC18F6xK22, power-on procedure improved
MPS MP2975/8, programming procedure improved
NAND flash devices, unified way of working with different types of permanent block protection
NEC uPD78F9842 [QFP44](UART), initialization procedure improved
NEC/Renesas uPD70F3524, verification procedure improved
Nuvoton NUC1xx series, file load procedure improved
Silicon Laborat. EFM8BB2x, EFM8BB3x, EFM8LB1x, EFM8UB1x, EFM8UB3x, verify procedure improved
SPI EEPROM (ISP), changed of information about WP\ pin level detected in L
STMicroelectronics STM32F09x, Option bytes blank check modified (to accept production state as the blank)
Bug Fixes
Atmel/Microchip AT89LP52 (ISP), supply voltage range bug fixed
Freescale Semic., NXP MC9S12Bxxx, fixed bug in Device info - section "Buffer data layout description"
Iflytek HD2886D [QFN48], programming algorithm bug fixed
Macronix MX28F2100B [TSOP48], programming bug fixed
Microchip ATmega808/809/1608/1609/3208/3209/4808/4809 in ZIF, power on sequence bug fixed
Microchip AVR UPDI devices, inability to disable CRC check bug fixed
Microchip dsPIC33EP256GMxxx, programming bug of the User ID locations fixed
NXP MCF5281 [MAPBGA256], AutomaticYES! bug fixed
STMicroelectronics BlueNRG-232, programming procedure bug fixed
STMicroelectronics STM32L5xx, erase procedure bug fixed
STMicroelectronics STM8AF6226TxSSS, programming procedure bug fixed
Best regards,
Daniel Smith