New software - Version 3.75
Posted: 25 Mar 2022 11:45
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 3.75 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
PG4UW, PG4UWMC, Load, Save dialogs, added dialog last position saving
PG4UWMC HW USB interface, SITE CLEAR signal when site not busy - processing fixed
Other Changes
Added module: AP1 QFN36-1.02 ZIF PIC-1
Fujitsu/Spansion/Cypress MB9B110T/210T/310T/410T/510T/610T series in LQFP176, insertion test improved
GigaDevice GD25Q80C, setting Protected memory modified
Infineon XDPE12284C [QFN40] (Single Config.), programming procedure improved
Microchip dsPIC33EP256MU810, added option to switch between the ICSP/EICSP modes
Microchip PIC16F184xx, programming EEPROM algorithm modified
Micron MT35XU02GCBA1G12, insertion test modified
Module AP1 BGA24-2 ZIF SFlash-1b, insertion test improved
Motorola/Freescale Semic. MC68HC705X32 [QFP64], separated EEPROM programming option added
MPS MP297x, improved of decoding *.txt file
NXP LPC55xx, reliability of communication improved
NXP PN7462xxx, programming procedure improved
Puya Semiconductor P25Q80H [SOP8-200], added support
Renesas/IDT 5P49V5901B000, add of programming Trim with values according *.tcs file
Renesas/IDT 5P49V5901B000, add of VCO calibration
Renesas/Intersil/Zilker Labs ZL2xxx, improving of ID check routine
Samsung KLMBG2JETD-B041 [FBGA153], added support PRV 0.8
Semtech LR1110, reliability initialization of device in modem implementation improved
STMicroelectronics M24M01-R, add options Empty check before programming
STMicroelectronics STM32H7xx, algorithms modified due to added OTP memory support
TI (TMS) MSP430FR58xx/FR59xx/FR6xx, added testing IP Encapsulation Signatures
Toshiba TMPM370FYFG (ISP-UART), speed of verification operation improved
Bug Fixes
Atmel/Microchip ATSAM4S2xx, verification procedure Lock Bits fixed
Freescale Semic., NXP MC9S08Axxx [LQFP44], insertion test bug fixed
Module AP1 QFN36 ZIF STM32&GD32, support fixed
Module AP1 QFP144-1.02 ZIF R5F-10 Automatic YES! bug fixed
Microchip AVR DA family, Unable to enter programming mode when RSTPINCFG fuse set to RESET bug fixed
Microchip AVR DA family in QFN32 package, Unexpected error bug fixed
Micronas HAL3930, HAL3900, verify error if MSb on address $5A in buffer is 1(lock bit set) bug fixed
NXP LPC11E37 (ISP-SWD), programming procedure bug fixed
Silicon Laborat. EFR32xG12xxx devices, Lock Bits Page programming bug fixed
STMicroelectronics M24M02, reading procedure bug fixed
STMicroelectronics STM32H7A3ZIT [LQFP144], OTPBL read/verify bug fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 3.75 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
PG4UW, PG4UWMC, Load, Save dialogs, added dialog last position saving
PG4UWMC HW USB interface, SITE CLEAR signal when site not busy - processing fixed
Other Changes
Added module: AP1 QFN36-1.02 ZIF PIC-1
Fujitsu/Spansion/Cypress MB9B110T/210T/310T/410T/510T/610T series in LQFP176, insertion test improved
GigaDevice GD25Q80C, setting Protected memory modified
Infineon XDPE12284C [QFN40] (Single Config.), programming procedure improved
Microchip dsPIC33EP256MU810, added option to switch between the ICSP/EICSP modes
Microchip PIC16F184xx, programming EEPROM algorithm modified
Micron MT35XU02GCBA1G12, insertion test modified
Module AP1 BGA24-2 ZIF SFlash-1b, insertion test improved
Motorola/Freescale Semic. MC68HC705X32 [QFP64], separated EEPROM programming option added
MPS MP297x, improved of decoding *.txt file
NXP LPC55xx, reliability of communication improved
NXP PN7462xxx, programming procedure improved
Puya Semiconductor P25Q80H [SOP8-200], added support
Renesas/IDT 5P49V5901B000, add of programming Trim with values according *.tcs file
Renesas/IDT 5P49V5901B000, add of VCO calibration
Renesas/Intersil/Zilker Labs ZL2xxx, improving of ID check routine
Samsung KLMBG2JETD-B041 [FBGA153], added support PRV 0.8
Semtech LR1110, reliability initialization of device in modem implementation improved
STMicroelectronics M24M01-R, add options Empty check before programming
STMicroelectronics STM32H7xx, algorithms modified due to added OTP memory support
TI (TMS) MSP430FR58xx/FR59xx/FR6xx, added testing IP Encapsulation Signatures
Toshiba TMPM370FYFG (ISP-UART), speed of verification operation improved
Bug Fixes
Atmel/Microchip ATSAM4S2xx, verification procedure Lock Bits fixed
Freescale Semic., NXP MC9S08Axxx [LQFP44], insertion test bug fixed
Module AP1 QFN36 ZIF STM32&GD32, support fixed
Module AP1 QFP144-1.02 ZIF R5F-10 Automatic YES! bug fixed
Microchip AVR DA family, Unable to enter programming mode when RSTPINCFG fuse set to RESET bug fixed
Microchip AVR DA family in QFN32 package, Unexpected error bug fixed
Micronas HAL3930, HAL3900, verify error if MSb on address $5A in buffer is 1(lock bit set) bug fixed
NXP LPC11E37 (ISP-SWD), programming procedure bug fixed
Silicon Laborat. EFR32xG12xxx devices, Lock Bits Page programming bug fixed
STMicroelectronics M24M02, reading procedure bug fixed
STMicroelectronics STM32H7A3ZIT [LQFP144], OTPBL read/verify bug fixed
Best regards,
Daniel Smith