New software - Version 3.07

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 40Pro universal ISP programmer.

Version 3.07 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman40ProDeviceList.pdf

Major Changes
Added information about PICmicro checksum to JobReport
Improved identification of error state at testing programming adapter/module
Fixed automatic checksum calculation for large devices with address range set by user to smaller size, that allows automatic checksum calculation. The checksum is now correctly displayed in "Programmer activity log"
Fixed bug in Automatic YES! indication (by LED Busy blinking)
Fixed problem with starting of device operation sequence from multiproject with sequence of predefined device operations for each sub-project individually
In PG4UW changed place of sending of device operation result to remote control application, to achieve better reliability for remote control application reactions on the operation result. Device operation result is now sent from PG4UW to remote control application after "Repeat?" or "Automatic YES!" window is displayed
In PG4UW fixed debug remote control commands logging, to display really all remote control commands
In PG4UWMC added function for mass configuration of ZIF socket actuation units
In PG4UWMC fixed Error message |'' is not a valid integer value| that occured after more then 9 devices programmed per each one programmer Site
In PG4UWMC fixed problem with project serialization associated file, that could sometimes be placed to different folder, than folder specified in serialization settings
In PG4UWMC fixed - device operation result LEDs status correctly turned off, after message "Please, insert a new device into socket!" (for Automatic YES! mode) is displayed

Other Changes
Added support of DIL48/TSOP56 ZIF 18.4mm NOR-11 adapter
AMD/Spansion Am29BL162CB [SSOP56], power-up sequence modified
Amic A29L800AU [TSOP48], reading and verifying procedure modified
Atmel AT91SAM7SE512, device ID check improve (add new ID code)
Atmel ATmega644/1284/2564RFR2, added support of programming user signature memory
Atmel ATmega644/1284/2564RFR2, programming sequence modified
Atmel ATmega64/128/256RFR2, added support of programming user signature memory
Atmel AVRxmega family, power-off sequence modified
Atmel AVRxmega family, power-on sequence modified
Cypress CY8C20234, CY8C20334, CY8C23533, CY8C20424, CY8C20324, CY8C20434, CY8C27643, CY8C21323, CY8C21434, CY8C21634, CY8C22213, CY8C24423, CY8C24423A, CY8C24794, CY8C24894, CY8C29666, CY7C66113C, CY7C60323, CY7C63833, CY7C64215-28, CY7C64215-56, change package name from MLF to QFN
eMMC devices, programming stability improvement
EON EN29GL128H [TSOP56], power-up sequence modified
Fujitsu/Spansion MB9AFB4x, power-up sequence improved
Hua Jie Tech. K24C16, verify procedure improved
Infineon SP37, programming procedure improved
Microchip PIC16F1937 [TQFP44], added support
Microchip PIC24FJ256GB110 Family, added programming option "USB 96 MHz PLL Disable bit"
NAND flash devices, Operation Check invalid blocks enhanced - now it is possible to use also customized invalid blocks indication scheme
NAND flash devices, Read JEDEC parameter page support added
NAND flash devices, Spare Area Usage = User Data with IB Info Forced mode changed (BI bytes are now forced only on specified pages)
National Semicond. COP8SBR9/COP8SCR9/COP8SDR9, marginal verify procedure modified
Nuvoton N79E855, update algorithm to latest verion of datasheet
Renesas/Hitachi devices with ROM code protection option, programming modified
Renesas uPD70F3558M1 [QFP176], uPD70F3522/23/24/25/26, uPD70F3570/71/72, added programming options "OPBT0 - Flash configuration option register 0" and "OCD Security ID"
Samsung K9K8G08U0E [TSOP48], read and verify operations stability improved
Serial Flash in package BGA24 6x4 ball array, TurboMode allowed
Spansion S29GL128PxxTxx01 [TSOP56]x16, power-up sequence modified
Spansion S70GL02GSxxFxx01 [FBGA64], progamming procedure modified
SyncMOS SM5964BWxxxx, programming procedure improved
TI (TMS) MSP430xxxx with 430X and 430Xv2 architecture, update algorithm to latest version of slau320n
Toshiba TC58NVG1S3HTA00 [TSOP48] (LGE-42), TC58NVG0S3HTA00 [TSOP48] (LGE-48), modification upon user request
Xilinx XC2Cxxx [PQFP208], improving of insertion test
Zilog Z86E08, reading procedure improved

Bug Fixes
Atmel AT32UC3L0128 [TQFP48], Wrong programming adapter replaced
Atmel ATmega2564RFR2, reading and programming bug on adresses higher than 2000h fixed
Atmel AVR family, testing of progamming adapters bug fixed
Fixed typo in adapter's name DIL48/QFP112 ZIF-CS HD64-2
IR IR3581, verify error bug fixed
Lattice BSCAN devices, addressing bug fixed
Macronix MX25L25655E [TFBGA24] (Quad I/O), Unexpected error 1 fixed
Micron MT25QL512ABA8E12 [TBGA24] (Quad I/O), Unexpected error 1 fixed
NAND flash devices, Permanent blank check error on small page (512 bytes) devices fixed
Nordic Semicond. nRF51822 [QFN48], Access violation bug fixed in _getBool
Spansion S25FL164K (ISP), fixed HW error
Spansion S25FL512SxxBxx21 [BGA24] (QuadSPI), Verify error fixed
Spansion S34ML01G200Bxx00 [BGA63] (EPS-10), ECC algorithm bug fixed
STMicroelectronics STM32, non-BGA adapters recognition/initialization fixed

Best regards,

Daniel Smith