New software - Version 3.93
Posted: 30 Apr 2024 13:18
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 3.93 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
Fixed Main Checksum calculation after "Select device" with Secondary buffer(s)
Other Changes
Added module: AP1 QFN48-2.02 ZIF MP-4
Added module: AP1 QFP64-1.02 ZIF R5F-2
AP1 QFN8-1 ZIF SFlash-1b, insertion test modified
Elmos E521.31B and E521.39B, communication procedure improved
GigaDevice GD25LB256E [WSON8 8x6], GD25LQ64C [USON8 4x4], added support
Infineon IMC101T, communication procedure improved
Lattice LC4128V/LC4256V [TQFP100], overcurrent limit increased
Macronix MX66UM1G45GXDx00 [BGA24] (Octa I/O), Alt+S menu improved
Microchip PIC16C72A, Vddmax value for verification procedure improved
Microchip PIC32MX795F512L, power-up procedure improved for ISP mode
Samsung KLMBG2JETD-B041 [FBGA153], added support PRV 0.9
STMicroelectronics STM32WBxx, algorithm modified
Texas Instruments TMS320F28003x, programming modification of DCSM OTP locations
Bug Fixes
Atmel/Microchip ATSAMC20J17A, blank check of RWW flash area bug fixed
Infineon XMC4xxx, programming procedure bug fixed
MPS MP2971/3/5/8, conversion of .txt file (type 2) to .bin file bug fixed
MPS MP2985H, MP2992H, saving of project file bug fixed
NAND flash devices, fixed a bug that caused the software to hang
Samsung K9F2808U0B [TBGA63], K9F2808Q0B [TBGA63], K9F2808Q0C [TBGA63], package name fixed (was FBGA63)
STMicroelectronics STM32C0, STM32L4, STM32L4+, STM32L5, STM32G0, STM32G4, program and verify algorithms fixed (could cause programmer communication error or any other unexpected way of terminating the operation resulting in programmer disconnection)
Texas Instruments TMS320F280034 and TMS320F280037, Alt+S menu bug fixed
Texas Instruments TMS320F28003x, DCSM LinkPointers locations programming bug fixed
TI (TMS) CC2651R3SIPAT0 [QFM59], ID check fixed
Winbond W25Q512JVxxN [SOIC16-300](QuadSPI), Unexpected error 1 [IEC:98, D:3D]! bug fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 3.93 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
Fixed Main Checksum calculation after "Select device" with Secondary buffer(s)
Other Changes
Added module: AP1 QFN48-2.02 ZIF MP-4
Added module: AP1 QFP64-1.02 ZIF R5F-2
AP1 QFN8-1 ZIF SFlash-1b, insertion test modified
Elmos E521.31B and E521.39B, communication procedure improved
GigaDevice GD25LB256E [WSON8 8x6], GD25LQ64C [USON8 4x4], added support
Infineon IMC101T, communication procedure improved
Lattice LC4128V/LC4256V [TQFP100], overcurrent limit increased
Macronix MX66UM1G45GXDx00 [BGA24] (Octa I/O), Alt+S menu improved
Microchip PIC16C72A, Vddmax value for verification procedure improved
Microchip PIC32MX795F512L, power-up procedure improved for ISP mode
Samsung KLMBG2JETD-B041 [FBGA153], added support PRV 0.9
STMicroelectronics STM32WBxx, algorithm modified
Texas Instruments TMS320F28003x, programming modification of DCSM OTP locations
Bug Fixes
Atmel/Microchip ATSAMC20J17A, blank check of RWW flash area bug fixed
Infineon XMC4xxx, programming procedure bug fixed
MPS MP2971/3/5/8, conversion of .txt file (type 2) to .bin file bug fixed
MPS MP2985H, MP2992H, saving of project file bug fixed
NAND flash devices, fixed a bug that caused the software to hang
Samsung K9F2808U0B [TBGA63], K9F2808Q0B [TBGA63], K9F2808Q0C [TBGA63], package name fixed (was FBGA63)
STMicroelectronics STM32C0, STM32L4, STM32L4+, STM32L5, STM32G0, STM32G4, program and verify algorithms fixed (could cause programmer communication error or any other unexpected way of terminating the operation resulting in programmer disconnection)
Texas Instruments TMS320F280034 and TMS320F280037, Alt+S menu bug fixed
Texas Instruments TMS320F28003x, DCSM LinkPointers locations programming bug fixed
TI (TMS) CC2651R3SIPAT0 [QFM59], ID check fixed
Winbond W25Q512JVxxN [SOIC16-300](QuadSPI), Unexpected error 1 [IEC:98, D:3D]! bug fixed
Best regards,
Daniel Smith