New software - Version 3.17

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.

Version 3.17 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf

Major Changes
Fixed problem with random SW delays after selecting new device
Improved installation for 64 bit Windows 7/8 and new Windows 10 (USB and LPT drivers)

Other Changes
Atmel ATmega1284/P (ISP-SPI), Calibration menu modified
Atmel ATmega164PV (ISP-SPI)(OSCCAL), Calibration bootloader changed
Atmel ATmega168 (ISP-SPI), power on sequence modified
Atmel ATmega644/PV (ISP-SPI)(OSCCAL), Calibration bootloader changed
Dallas/Maxim DS28E15, verification procedure modified
Freescale Semic. S12XE family, verify of special register (partitioning) added
Freescale Semic. SPC5604E [LQFP64], programming algo improved
GMT G2510, programming algorithm improved
Intel/Numonyx/Micron PC28F00AM29EWH [BGA64], added support
Intel/Numonyx/Micron PC28F00AM29EWHA [BGA64], power-up sequence modified
Intel/Numonyx/Micron PC28F00AM29EWL [BGA64], added support
Macronix MX25L2006E [WSON8] (Dual O), improving of Verify operation
Macronix MX25R3235F, changed device name and backward project compatibility correction
Macronix MX25R6435F, changed device name and backward project compatibility correction
Macronix MX25R8035F, changed device name and backward project compatibility correction
Microchip PIC16F81x [SSOP20], PIC16LF81x [SSOP20], power-up sequence modified
Microchip PIC18F6xK22, PIC18F8xK22, power-on procedure improved
Microchip PIC24FJxxx (ISP), power-off procedure improved
Micron N25Q008Ax1E, changed device name and backward project compatibility correction
Micron N25Q016Ax1E, changed device name and backward project compatibility correction
Micron N25Q032Ax1E, changed device name and backward project compatibility correction
Micron N25Q032Ax3E, changed device name and backward project compatibility correction
Micron N25Q064Ax1E, changed device name and backward project compatibility correction
Micron N25Q064Ax3E, changed device name and backward project compatibility correction
NXP LPC1768 [TFBGA100], programming algorithm improved
Renesas M30626FJPGP, Block A modified
Renesas R5F100LGA (ISP), programming speed increased
Renesas R5F52105xxFM, R5F52106xFM, R5F52107xFM, R5F52108xFM, allowed read operation
Renesas R5F52106xxFM [LQFP64] Boot mode, buffer size modified
Spansion S29GL512NxxFxx02 [FBGA64] x16, power-up sequence modified
Spansion S71VS064RB0AHT0L [FBGA52], programming procedure modified
Xilinx XC95288XL [FBGA256], Alt+S view/edit dialogue improved

Bug Fixes
Atmel ATmega2561 (ISP-SPI)(Enhanced), "Access violation in _getInt: Powered_out" bug fixed
Atmel ATSAM4S2xxx, read and verification procedure of config. bits bug fixed
Catalyst (CSI)/ON Semiconductor CAT34TS02 [TDFN8], insertion test bug fixed
Energy Micro/Silicon Laborat. EFM32GGxx/EFM32LGxx, Chip erase procedure bug fixed
Freescale Semic. MCF51AC256B [LQFP80], device overcurrent error fixed
Fujitsu MB85R4001A, bug fixed
Macronix MX25L5121E, Verify bug fixed
Microchip PIC24HJxxxGPxxx in TQFP44 and QFN44 packages, Unexpected error 1 [IEC:0, D:00]! bug fixed
Microchip SST26VF064B, programming configuration register bug fixed
NEC/Renesas uPD70F/78F, insertion test procedure bug fixed
Nec/Renesas uPD70F33xx, verification procedure bug fixed
NEC/Renesas uPD78F0881A [LQFP44], insertion test bug fixed
NOR devices, bug fixed for blank check (BC) + program (P) + verify (V) action set
NXP LPC2368 [TFBGA100], device size fixed
Renesas RL78 Family, Set Security bug fixed
Renesas RL78 Family, project compatibility bug fixed
Silicon Laborat. EFM8BB21F16 [QSOP24], addresses of Security Lock bytes bug fixed
STMicroelectronics STM32F, WRP to nWRP bytes conversion bug fixed in Device Access configuration menu
STMicroelectronics STM32F2xx and STM32F4xx in ISP-JTAG and/or ISP-JTAG CHAIN mode, Software error: SWJDP/EC:9202 fixed (device programming, required readout protection different from level 0)
Texas Instruments LM3Sxxx, erase bug fixed
TI (TMS) UCD3138, Chip erase verify bug fixed
Toshiba TMP86PH06U [LQFP44], insertion test bug fixed
Winbond W25Q64FW [SOIC8] (QuadSPI), programming bug fixed
Winbond W25Q64FW [SOIC8], W25Q64FW [VSOP8], adapter test bug fixed
Word EPROM devices, ID check bug fixed

Best regards,

Daniel Smith