Page 1 of 1

New software - Version 2.47

Posted: 18 Nov 2011 12:47
by Dataman (Daniel Smith)
Dear Dataman users,

New software has just been posted on our software pages for the Dataman T51Pro MCS51 / AVR ISP programmer.

Version 2.47 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: DatamanT51ProDeviceList.pdf

Bug Fixes
Atmel AT90PWM3 [MLF32], AT90PWM3B [MLF32] and AT90PWM316 [MLF32], programming adapter type bug fixed
Dallas/Maxim 1-Wire, reading bug fixed
Freescale/Motorola MC68HC705C9, programming bug fixed
Freescale/Motorola MC9S12xxx, BDM synchronization improved
Microchip PIC16C73A, CFG part verify error fixed
Microchip PIC16F882, PIC16F883, PIC16F884, PIC16F886, PIC16F887, verification bug fixed
Philips/NXP, TDA12176H/N2 [QFP80], Device operation options menu bug fixed
Philips/NXP, UOC-Fighter series, improving of entering pgm. mode
Ramtron FM25L256, programming bug fixed
Samsung K9F8G08U0M, bad blocks table creation bug fixed
Spansion S29WS128J, ID check bug fixed and programming improved
Spansion S29GL128P, SecSi sector read bug fixed
Spansion S29GL128NxxFxxV1, S29GL128NxxFxxV2, S29GL512NxxFxxV1, S29GL512NxxFxxV2, adapter information improved
SST SST34HF32A4 read and ID check bug fixed
Toshiba TH58NVG5D4CTG20 [TSOP48] and TH58NVG4D4CTG00 [TSOP48], bug fixed
W25X64V [WSON8], name of manufacturer fixed
Xilinx XC17V08/16, reading of configuration bits bug fixed
Identification of DIL48/QFP64 ZIF XC-1 bug fixed

Other Changes
Altera EP18xx, TI (TMS) EP18xx, Intel N5C180, 5C180, adding of further information about DIL48/PLCC68 ZIF PLD-2 convertor
Atmel AVR chips, ISP communication modified
Atmel ATmegaxxxx, ATtinyxxxx, AT90xxxxxx, added testing and indication of chip protected state, before executing of the read, blank check, verify and Program functions
Atmel ATmega88, ISP programming improved
Atmel AT49BV322D, ID check procedure improved
Cypress CY7C64215-28 programming speed increased
Dallas/Maxim DS28E01, Blank check before programming feature deactivated
Dallas/Maxim DS28E01, programing procedure improved. Automatic read of status bytes before programming added
Freescale/Motorola MC68HC705Bx, modification of device operation options
Hitachi/Renesas MCU (HD64F2506, HD64F2552, HD64F2556, HD64F2138, HD64F38327, HD64F3687, HD64F3607, HD64F2378, HD64F2377, RE144AV, HD64F2145BFA and similar), power-down sequence improved
Lattice LCMXO256C/E, LCMXO640C/E, improving of insertion test
Microchip PIC16C505, PICmicro checksum calculation added
Microchip PIC16C715, PIC16C73A, PIC16C58, PIC16C71, read User ID area improved
Microchip PICmicro (ISP), added options to handle a big capacitor at VDD pin
NXP PCA24S08, added programming access protection page
NXP LPC23xx, ID check improved
Samsung K5N3216A and K5N3217A, OTP sector programming improvement
SGS-Thomson (STM) M95040 and Microchip 25LC040, programming of Status register improved
Spansion S25FL040A-I/T/B, edit name and backward project compatibility correction
Spansion S29GLxxxM a S29GLxxxA, device marking information updated
Spansion S29GL128N, power up procedure improved
Xilinx XCR3xxxXL, improving of starting sequence, improving of ID check test
Xilinx XC3S200AN, improving General info and programming options
Added function for calculation and setting up of calibrating RCCR constants for following STM devices: ST7FLITE09Y0B, ST7FLITE05Y0B, ST7FLITE02Y0B, ST7FLITES2Y0B, ST7FLITE29F2B, ST7FLITE29F2M [SOIC20], ST7FDALIF2B, ST7FDALIF2M [SOIC20], ST7FLITE20F2B, ST7FLITE20F2M [SOIC20], ST7FLITE25F2B, ST7FLITE25F2M [SOIC20], ST7FLITE19F1B, ST7FLITE19F1M [SOIC20], ST7FLITE10F1B, ST7FLITE10F1M [SOIC20], ST7FLITE15F1B, ST7FLITE15F1M [SOIC20], ST7FL09Y0M [SOIC16], ST7FL05Y0M [SOIC16]
STM STR7xx and STR91x series, progress bar during erase improved

Best regards,

Daniel Smith