New software - Version 3.85

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 40Pro universal ISP programmer.

Version 3.85 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman40ProDeviceList.pdf

Major Changes
PG4UWMC: fixed PG4UWMC software exception "Permission denied (#10013 in Bind)" bug during searching programmers

Other Changes
Analog Devices ADM1260, erase procedure improved
Atmel/Microchip ATtinyxx4/xx6/xx7 in ZIF and (ISP), Power-on sequence modified, effectiveness improved
Atmel/Microchip ATmega3208/3209/4808/4809 family, Power-on sequence modified, effectiveness improved
Atmel/Microchip devices using UPDI, work with the devices improved. Some fuse settings cause failures
cFeon(Eon Si.Sol.) EN25QX128A(2V) [SOP8-208] (QuadSPI), EN25QX128A(2V) [SOP8-208], changed device name and backward project compatibility
Eon Silicon Sol. EN25QX128A(2V) [SOP8-208] (QuadSPI), EN25QX128A(2V) [SOP8-208], changed device name and backward project compatibility
ESMT EN25QX128A(2V) [SOP8-208] (QuadSPI), EN25QX128A(2V) [SOP8-208], changed device name and backward project compatibility
ICT PEEL22VC10A, improving of overcurrent protection system
Infineon TC2xx, TC3xx devices, power-up procedure improved
Infineon SAK-TC212L-8F133F AC (ISP-DAP), add info to LOG
Microchip AVR DA/DB family, Power-on sequence modified, effectiveness improved
Microchip/Atmel PLD devices, improved device info with decoupling capacitor value
Micron M25P32-V [SO16], added support for MemProg2
Numonyx M25P32-V [SO16], added support for MemProg2
Nuvoton NUC1xx, NUC2xx, programming Config registers improved
Nuvoton NUC1xx (ISP), verifying device improved
NXP LPC8xx, in Code read protection (CRP) added NO_ISP level
Renesas R5F564MxxxFC, R5F564MxxxLK, added programming of Data area and Option area
Renesas RX130 group blank, read and verify operations allowed
Renesas/IDT 5P49V6965A000, reliability of programming improved
STMicroelectronics M25P32-V [SOIC16], added support for MemProg2
STMicroelectronics STM32G4 series, programming method changed (introduced modes program all data, only data from file, only nonblank data; discarded mode program selected pages)
STMicroelectronics STM32H7xx, modified IWDGx option bits description
STMicroelectronics STM32H7xx, modified verify algorithm for speed improve
TI (TMS) TPS65086100, programming procedure improved
Winbond W25Q128JVxxM-DTR [SOIC8-200] (LS), added support

Bug Fixes
Analog Devices ADM1266, load/save project bug fixed
Renesas R5F564MxxxLK, programmer configuration bug fixed
STMicroelectronics STM32C0, STM32G0 and STM32L4 series, fixed check of possible conflicts with protections active in device before programming
STMicroelectronics STM32G4 and STM32L4 series, fixed possible problems if dual-bank mode was changed in menu, but the menu changes were cancelled
STMicroelectronics STM32H7xx, RDP erase bug fixed

Best regards,

Daniel Smith